DSI Card
Overview
Expand your D-Show or Profile System with additional digital inputs. The DSI (Digital Stage Input) Card is an option for the Stage Rack that adds eight channels of software-controlled and fully recallable digital inputs. Get access to eight inputs either through the card's four two-channel AES/EBU XLR connectors or its ADAT TOSLINK optical connector.
You can install up to six DSI Cards into a single Stage Rack for a total of 48 digital input channels, or mix and match with other Stage Rack option cards to customize your input.
Features
- Eight digital input channels through four two-channel AES/EBU XLR3-female connectors, or a single ADAT TOSLINK optical connector
- Word Clock Out connector for synchronizing external digital devices
- Automatic sample rate conversion (SRC) and detection on input; manually defeatable for lowest possible input latency
- SRC status LEDs for both AES/EBU and ADAT connections
- Lock status LEDs for both AES/EBU and ADAT connections
Specifications
| AES Digital Outputs | |
|---|---|
| Connector (x4) | XLR3-F |
| Format | AES 3 (AES/EBU) |
| Termination | 110 Ohm |
| Maximum Cable Length | 328 ft (100 m) |
| Word Length | 24-bit |
| Supported Sample Rate (with SRC) | 32 kHz to 96 kHz per input pair (available globally for ADAT inputs) |
| ADAT Digital Outputs | |
| Connector | TOSLINK Optical |
| Format | ADAT, 8-channel |
| Word Length | 24-bit |
| Supported Sample Rate (with SRC) | 44.1 kHz to 48 kHz (available globally) |
| Word Clock Out | |
| Connector | BNC-F |
| Format | Word Clock Out |
| Source Impedance | 75 Ohm |
| Drive Level | 2.5V pk-pk into 75 Ohm load |
