x

Mix Rack Specifications

VENUE Mix Rack VENUE Mix Rack

Mix Rack Specifications (at maximum configuration)

Dimensions ( H x W x D) 19.25 x 19 x 18 inches (489 x 483 x 458 mm)
Rack Spaces 11 U
Weight 100 lbs (45.4 kg)
Power Requirements AC 100–240V, 50–60 Hz, 360 W
Word Clock In/Out Connectors BNC female (2)
USB Ports (3) USB 2.0
FOH Link Connector (to Main Unit) MIL connector
Max FOH Link Cable Length 11 ft (3.35 m)

Mix Rack General Audio Specifications

Internal Sample Rate 48 kHz
External Sample Rate 48 kHz +/-10 ppm (Word Clock input)
Processing Delay (Latency) Less than 2.3 ms
Internal Processing Up to 48-bit, fixed point (288 dB internal dynamic range)
Frequency Response 20 Hz – 20 kHz BW (+/-0.2 dB, relative to 1 kHz)
Dynamic Range 110 dB (analog stage input to analog stage output, +24 dBu, A-weighted, 20 Hz – 20 kHz BW)
Crosstalk -100 dB (adjacent stage input to L-R bus, @ 1kHz)
Residual Output Noise -90 dBu
Maximum Voltage Gain 84 dB (stage input to L-R bus, channel & L-R faders @ max

Mix Rack Stage I/O (standard configuration)

AI16 Analog Input Card (3)
Connector (x16) XLR3-F, balanced
Phantom Power +48V (individually switchable per channel via software)
Gain +10 dB to +60 dB
Maximum Input Level +32 dBu with pad (0 dBu = 0.775V rms)
Pad 20 dB
Input Impedance pad off: 5.5K Ohm; pad on: 3.8K Ohm
EIN -126 dBu (maximum gain, 150 Ohm source, 20 Hz – 20 kHz BW, unweighted)
THD + N 0.003% (minimum gain, pad off, -1 dBFS output, 20 Hz to 20 kHz BW
A/D Converter Latency 0.25 ms
AO16 Analog Output Card (1)
Connector (x16) XLR3-M, balanced
Maximum Output Level +24 dBu (0 dBu = 0.775V rms)
Output Impedence 50 Ohm
D/A Converter Latency 0.58 ms

Mix Rack Synchronization and Control I/O

MIDI In 5-pin DIN F (1)
MIDI Out 5-pin DIN F (1)
Word Clock In BNC-F (1)
Word Clock Out BNC-F (1)
FOH Link 55-pin (1)
Ethernet (ECx) RJ-45 (100BaseT)

Mix Rack FOH I/O

Com Input

Connector Neutrik combi XLR/TRS
Phantom Power +15V @ 6mA (switchable on Mix Rack back panel)
Gain -2 dBu to -32 dBu, 6 steps
Input Impedance 20K Ohms

Talkback Mic Input

Connector XLR3-F
Phantom Power +15V @ 6mA (always on)
Gain -20 dBu (fixed)
Input Inpedance 20K Ohms
Analog Line Inputs 1–8; 2-Track Analog Inputs
Connector 1/4-inch TRS
Maximum Input Level +24 dBu
Input Impedance 10K Ohms
THD + N 0.003%
Analog Outputs 1–8; 2-Track Analog Outputs; Monitor L/R
Connector 1/4-inch TRS
Maximum Output Level +24 dBu
Output Impedance 50 ohms

Digital Inputs

2-Track AES

Connector XLR3-F
Format AES/EBU
Word Length 24-bit
Sample Rate 48 kHz
Sample Rate Conversion 32 kHz to 96 kHz

2-Track S/PDIF

Connector RCA co-axial
Format SPIDF (IEC-60958)
Word Length 24-bit
Sample Rate 48 kHz
Sample Rate Conversion 32 kHz to 96 kHz

Digital Outputs

2-Track AES

Connector XLR3-M
Format AES/EBU
Word Length 24-bit
Sample Rate 48 kHz
Sample Rate Conversion None
Dithering None
Channel Status Info Pro, Audio 48K, No Emphasis

2-Track S/PDIF

Connector RCA coaxial
Format SPIDF (IEC-60958)
Word Length 24-bit
Sample Rate 48 kHz
Sample Rate Conversion None
Dithering None
Channel Status Info Consumer, Audio, 48K, Non-copy, 2-Channel, General Category, Level 2 Clock