VENUE | AI16 Analog Input Card

AI16anetoutput_left

Get a spare or replacement analog input card for your SC48 console, Mix Rack System, or Stage 48 remote I/O box. The AI16 (Analog Input 16) Card provides 16 channels of software-controlled, fully recallable analog mic/line inputs through XLR connectors. Both SC48 and Mix Rack come standard with the maximum three AI16 Cards, giving you a total of 48 analog mic/line input channels. This option provides you with a spare or replacement module.

Features

  • 16 analog inputs
  • Phantom power
  • Pad
  • Gain control
  • Polarity invert
  • Send up to 16 channels of analog line-level inputs through XLR3-male connectors.

  • Provides 48 volts of power for microphones (selectable per channel using VENUE software).

  • Reduce the input gain 20 dB to take down hotter signals (selectable per channel in VENUE software).

  • Adjust gain levels in 0.1 dB steps (selectable per channel in VENUE software).

  • Minimize phase issues with complex miking to get better sound (selectable per channel in VENUE software).

System requirements

  SYSTEM
 One of the following:
 VENUE | SC48 console
 Stage 48 remote I/O box
 VENUE | Mix Rack System

SPECIFICATIONS

 ANALOG MIC/LINE INPUTS
 Connector (x16)
XLR3-F, balanced 
 Gain +10 dB to +60 dB (6 dB analog steps, with 0.1 dB digital increments
and crossfade at analog relay switch point) 
 Maximum Input Level +32 dBu (pad ON) 
 Pad 20 dB 
 Input Impedance
Pad OFF: 5.5k Ohm balanced; pad ON: 3.8k Ohm balanced 
 Phantom Power  +48V
 EIN -126 dBu (maximum gain, 150 Ohm source, 22 Hz – 20 kHz BW, unweighted) 
 THD + N 0.003% (minimum gain, pad OFF, -1 dBFS output, 20 Hz – 20 kHz BW)
 A/D Converter Latency 0.25 ms (Fs = 48 kHz) 

All measurements at Fs = 48 kHz, with 150 Ohm source impedance and 600 Ohm load impedance, unless otherwise specified.

0 dBu = 0.775Vrms

Downloads