Specifications

Hardware Specifications

PROFILE CONSOLE SPECIFICATIONS
 Maximum Height (front)
3.2 inches (81 mm) 
 Maximum Height (rear)  6.8 inches (169 mm)
 Maximum Width 45.21 inches (1150 mm) 
 Maximum Depth  31.11 inches (790 mm)
 Weight  90 lbs (40.8 kg)
 Power Requirements 100–240 VAC, 50–60 Hz, 160 W 
 USB Ports (3) USB 1.1
 VGA Port DB-15 mini-female (1024 x 768 resolution)
 Footswitch Connectors (2) 1/4-inch TRS 
 GPI In Port  DB-25 D-Sub, female
 GPI Out Port  DB-25 D-Sub, male
 Console Light Connectors (2)  XLR
 FOH Link Connector (to FOH Rack or Mix Rack)  MIL connector
 Max FOH Link Cable Length  11 ft (3.35 m)
 MIX RACK SPECIFICATIONS (at maximum configuration)
 Dimensions ( H x W x D) 19.25 x 19 x 18 inches (489 x 483 x 458 mm) 
 Rack Spaces 11 U 
 Weight 100 lbs (45.4 kg) 
 Power Requirements AC 100–240V, 50–60 Hz, 360 W 
 Word Clock In/Out Connectors BNC female (2) 
 USB Ports (3) USB 2.0 
 FOH Link Connector (to Main Unit) MIL connector
 Max FOH Link Cable Length  11 ft (3.35 m)

 MIX RACK GENERAL AUDIO SPECIFICATIONS
 Internal Sample Rate 48 kHz 
 External Sample Rate 48 kHz +/-10 ppm (Word Clock input) 
 Processing Delay (Latency) Less than 2.3 ms 
 Internal Processing  Up to 48-bit, fixed point (288 dB internal dynamic range)
 Frequency Response 20 Hz – 20 kHz BW (+/-0.2 dB, relative to 1 kHz) 
 Dynamic Range 110 dB (analog stage input to analog stage output, +24 dBu, A-weighted, 20 Hz – 20 kHz BW) 
 Crosstalk  -100 dB (adjacent stage input to L-R bus, @ 1kHz)
 Residual Output Noise  -90 dBu
 Maximum Voltage Gain 84 dB (stage input to L-R bus, channel & L-R faders @ max

 MIX RACK STAGE I/O (standard configuration)
 AI16 ANALOG INPUT CARD (3)
 Connector (x16) XLR3-F, balanced 
 Phantom Power  +48V (individually switchable per channel via software)
 Gain  +10 dB to +60 dB
 Maximum Input Level +32 dBu with pad (0 dBu = 0.775V rms) 
 Pad  20 dB
 Input Impedance pad off: 5.5K Ohm; pad on: 3.8K Ohm 
 EIN  -126 dBu (maximum gain, 150 Ohm source, 20 Hz – 20 kHz BW, unweighted)
 THD + N 0.003% (minimum gain, pad off, -1 dBFS output, 20 Hz to 20 kHz BW 
 A/D Converter Latency  0.25 ms
 AO16 ANALOG OUTPUT CARD (1)
 Connector (x16)  XLR3-M, balanced
 Maximum Output Level +24 dBu (0 dBu = 0.775V rms) 
 Output Impedence 50 Ohm 
 D/A Converter Latency 0.58 ms

 Mix Rack Synchronization and Control I/O
 MIDI In
 5-pin DIN F (1)
 MIDI Out  5-pin DIN F (1)
 Word Clock In BNC-F (1) 
 Word Clock Out  BNC-F (1)
 FOH Link  55-pin (1)
 Ethernet (ECx)  RJ-45 (100BaseT)

 Mix Rack FOH I/O
 COM INPUT
 Connector  Neutrik combi XLR/TRS
 Phantom Power  +15V @ 6mA (switchable on Mix Rack back panel)
 Gain  -2 dBu to -32 dBu, 6 steps
 Input Impedance  20K Ohms
 TALKBACK MIC INPUT
 Connector  XLR3-F
 Phantom Power  +15V @ 6mA (always on)
 Gain  -20 dBu (fixed)
 Input Inpedance
 20K Ohms
 ANALOG LINE INPUTS 1–8; 2-TRACK ANALOG INPUTS
Connector
1/4-inch TRS 
 Maximum Input Level  +24 dBu
 Input Impedance  10K Ohms
 THD + N 0.003% 
 ANALOG OUTPUTS 1–8; 2-TRACK ANALOG OUTPUTS; MONITOR L/R
 Connector  1/4-inch TRS
 Maximum Output Level  +24 dBu
 Output Impedance 50 ohms 
 DIGITAL INPUTS 2-TRACK AES
 Connector XLR3-F 
 Format  AES/EBU
 Word Length  24-bit
 Sample Rate  48 kHz
 Sample Rate Conversion  32 kHz to 96 kHz
 2-TRACK S/PDIF
 Connector  RCA co-axial
 Format  SPIDF (IEC-60958)
 Word Length  24-bit
 Sample Rate  48 kHz
 Sample Rate Conversion  32 kHz to 96 kHz
 DIGITAL OUTPUTS 2-TRACK AES
 Connector XLR3-M 
 Format AES/EBU 
 Word Length  24-bit
 Sample Rate  48 kHz
 Sample Rate Conversion  None
 Dithering  None
 Channel Status Info  Pro, Audio 48K, No Emphasis
 2-TRACK S/PDIF
 Connector  RCA coaxial
 Format SPIDF (IEC-60958) 
 Word Length  24-bit
 Sample Rate  48 kHz
 Sample Rate Conversion  None
 Dithering  None
 Channel Status Info  Consumer, Audio, 48K, Non-copy, 2-Channel, General Category, Level 2 Clock